Publicité
Les langues disponibles
Les langues disponibles
3. System Settings
3.1 Date and Time
Date
Log on the menu, press
[ ]
1
Press
[ ]
or
[ ]
, choose "Date and Time", press
2
Press
[ ]
or
[ ]
, choose "Date", press
3
Input date, press
[Enter].
4
Date Format
Log on the menu, press
[ ]
1
Press
[ ]
or
[ ]
, choose "Date and Time",press
2
Press
[ ]
or
[ ]
,
choose "Date Format",press
3
Press
[ ]
or
[ ]
,
choose format, press
4
Time
The default time is on 24 hours standard.
Log on the menu, press
[ ]
1
Press
[ ]
or
[ ]
, choose "Date and Time", press
2
Press
[ ]
or
[ ]
,
choose "Time",press
3
Input
current time
, press
[Enter]
4
3.2 Entry and Exit Delay
If user is not used to taking along with the remote control, entry and exit delay
could be set in the system. Following is the operation instruction for arming
and disarming.
When entry and exit delay is set, user could exit the house in set time period,
then system will be armed automatically; when user is back without disarming
the system, entry delay will allow time for user to disarm the system.
Otherwise, the system will treat this as an intrusion and it will be triggered and
send out alarming alert.
Note!
The entry and exit delay is only for delay sensors.
Entry Delay
Entry delay is set to give time to user for disarming the system before the
triggered sensors send signal to control panel after the set time.
15
All manuals and user guides at all-guides.com
or
[ ]
, choose "System Settings", press
[Enter]
[Enter]
.
[Enter]
.
or
[ ]
, choose " System Settings " , press
[Enter]
[Enter]
.
[Enter]
.
[Enter]
.
or
[ ]
,
choose " System Settings " , press
[Enter]
[Enter]
.
[Enter]
.
.
1
2
3
4
.
Exit Delay
Exit delay is set to give time to user for arming the system and then exit
within the set time.
1
.
2
3
4
Once delay time is set, when arm the system, one beep will be heard every
second to remind the user to leave, the reminding rhythm will speed up in
the last 15 seconds.
.
3.3 Backlight Time
User can set standby time for the backlight on the blue LCD display
accordingly.
1
2
3
4
3.4 Timed Arm / Disarm
User can set timed arm and disarm according to daily schedule to
avoid repeated operation.
Timed Arm
1
2
3
4
Log on the menu, press
[ ]
or
[ ]
, choose "System Settings", press
Press
[ ]
or
[ ]
, choose "Entry Exit Delay", press
Press
[ ]
or
[ ]
, choose "Entry Delay", press
Input time for entry delay; press
[Enter]
for con rmation.
Entry delay time is calculated on seconds; default is 0 second (o ); setup
range is 0-999 seconds.
Log on the menu, press
[ ]
or
[ ]
,
choose "System Settings", press
Press
[ ]
or
[ ]
, choose "Entry Exit Delay", press
Press
[ ]
or
[ ]
, choose "Exit Delay", press
Input time for exit delay; press
[Enter]
for con rmation.
Exit delay time is calculated on seconds; default is 0 second (o );
setup range is 0-999 seconds.
Log on the menu, press
[ ]
or
[ ]
,
choose "System Settings", press
Press
[ ]
or
[ ]
, choose "Backlight Time", press [Enter].
Input time for backlight time; press [Enter].
Backlight time is calculated on seconds; default is 20 seconds; setup range is
01-99 seconds.
Log on the menu, press
[ ]
or
[ ]
,
press
[Enter]
.
Press
[ ]
or
[ ]
, choose "Auto Arm/Disarm", press
Press
[ ]
or
[ ]
, choose "Auto Arm Time", press
Input exact time for arming; press
[Enter]
[Enter]
.
[Enter]
.
[Enter]
.
[Enter]
.
[Enter]
.
[Enter]
.
[Enter]
.
choose "System Settings",
[Enter]
.
[Enter]
.
.
16
Publicité
