eTIGER TL SECUAL Mode D'emploi page 13

Connect to Electronic Lock
Please ignore this if user is not intended to put this alarm as access control. This alarm
only sends on/o signal to electronic door lock, please refer to related electronic door
lock manual for details.
Connect to CMS Center
Please ignore this step if users don't need to connect to CMS center. When connected
to CMS center, control panel will upload contact ID to CMS center automatically once
intrusion is detected.
Add CMS Phone Number
When CMS center phone number is stored, the control panel will auto dial to CMS center
automatically when alarm.
Log on the menu, choose "Phone Numbers", press
1
Press [ ] or [ ] , choose "Add Phone Number", press
2
Press [ ] or [ ] , choose "CMS Number1"or "CMS Number2", press
3
Input CMS phone no, press [Enter] . If group extension telephone number
4
is used to connect to the CMS center, please add 0# or9# before the phone
number you plan to store.
Note!
If user wants to check or edit the pre-stored phone no., enter "CMS Number
1~2" to check or edit.
Delete CMS Phone Number
Log on the menu, choose "Phone Numbers", press
1
Press [ ] or [ ] , choose "Del Phone Number", press
2
Press [ ] or [ ] , choose in order "CMS Number1~2", press
3
Delete stored CMS phone no., Press
4
User ID
It is supplied by CMS center. After it is stored, CMS center can exactly know user's
location according to the ID number.
Log on the menu; press [ ] or [ ] , choose "System Settings", press
1
Press [ ] or [ ] , choose "User ID", press
2
LCD display will show "Input 4 Digits", input 4 digits user ID, press
3
Upload Arm/ Disarm Report to CMS Center
1 When this function is enabled, all arm/disarm reports will be uploaded
automatically to CMS center, so that CMS center can know the status of the alarm
system.
After the User ID is set, press [ ] or
2
"Disarm Upload", press [Enter] .
Press [ ] or [ ] , Choose "On", press
3
When choosing "O " during setup , press
will not be uploaded to CMS center.
23
All manuals and user guides at all-guides.com
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[Enter] .
[ ] to choose "Arm Upload" or
[Enter] .
[Enter] , arm/ disarm report
2
Contact ID Reports
Event Code Event
3401 Arm
1401 Disarm
Disarm by RFID tag
1409
1132
PIR detector alarm
1131 Door contact alarm
Emergency call
1100
1120 Duress alarm
Home mode (part arm)
3456
Precautions
To p revent h a rm to u ser s o r o t h er pe op l e du r ing u s age o f t h e produ c t a nd to
ex tend th e li fe s p an o f t h e p rodu c t, plea s e fo l low t h e p rec au t i on s be low :
General Instruction
The wireless accessories should be connected to the control panel before use.
Low power voltage would a ect transmitting distance range.
2 cells of 3.7V/800mAh battery backup or standard power adapter for power supply.
All accessories from our company are compatible with this control panel.
Do not press SOS key if there is no emergency to avoid disturbing neighborhood.
Check the system regularly to ensure the system works properly in case of emergency.
The control panel is neither waterproof nor moisture-proof, please install it in a shady,
cool and dry place.
The case of the control panel is made of ABS. Please keep it away from strong light
for a longer lifespan.
Forbiddance
The control panel is non explosion-proof. Please keep it away from re, ame sources.
Install the control panel away from objects such as heater, air conditioner, microwave
oven etc. that produces heat or electric-magnetic.
Forbiddance of Decomposition
Take the control panel for disposal of recycling according to the local regulation.
Disassembly for this product can not be done by non-professionals.
Event Code Event
Control panel tamper alarm
1137
Sensor tamper alarm
1144
1140 Normal zone alarm
1133
24H zone alarm
Sensor low battery
1384
Control panel low battery
1302
Control panel AC failure
1301
24