Publicité
Les langues disponibles
Les langues disponibles
Wireless Door Window Contact
/
Features
The SAC-03 is a Door/Window Contact that can be installed on doors, windows, and any other
objects that open and close. The sensor transmits signals to the control panel when a magnet
mounted near the sensor is moved away. External input for wired accessory is available at the
N/C interface. The tamper protection ensures that sabotage attempts to move the contact will
result in an alarm activation.
Appearance
LED indicator
Transmitter
LED Indication
LED ashes once:
Door/window is opened and transmitter sends signal to the control panel.
LED ashes quickly(after triggered):
PCB Layout
Tamper switch
Note!
Tamper switch only works when the system is in Arm State.
Installation & Notice
Remove the battery activation strip, the sensor
will enter working state immediately.
Mount the sensor on the door frame and the
magnet on the door.
Make sure the magnet is on the right side of
the transmitter.
Place the transmitter in the desired location,
mount the magnet no more than 1cm away
from the transmitter and secure transmitter
and magnet with double-sided tapes or screws.
Avoid mounting sensors in areas with a large
quantity of metal or electrical wiring, such as
a furnace or utility room.
27
All manuals and user guides at all-guides.com
Magnet
Low power indication, please change battery as soon as
possible.
Speci cations
Power supply
DC 1.5V (AA 1.5V LR6 Battery x 1pc)
Static current
≤ 30uA
Alarm current
≤ 40mA
Transmitting distance
≤80m (in open area)
Radio frequency
315MHz or433MHz (±75KHz)
Wireless PIR Motion Detector
Features
SAC-01 is a high performance wireless P.I.R. motion detector. It consists of digital dual-core
fuzzy logic infrared control chip and intelligent analysis which e ectively identify interference
signals from body movement signals and reduce false alarm rate. With automatic
temperature compensation and anti-air turbulence technology, it easily adapts to
environmental changes. The detector also has the advantages of energy saving, reliability
and easy installation.
Appearance
LED Indication
Flash continuously:
Under the self-testing state.
Flash once:
Intruder is detected.
Flash twice:
Self-testing is nished, enters
batteries immediately.(User will get alert SMS about the low battery if the PIR detector is connected
to the GSM alarm system.)
PCB Layout
LED ON / OFF
Tamper switch
Infrared sensor:
It detects
the infrared rays released by human body motion, please don't
touch the surface and always keep it clean.
Tamper switch:
Once the case is opened in working state, the tamper switch will be
triggered and then generates an alarm signal.
Housing material
ABS plastic
Operating Condition
Temperature -10°C~55°C
Relative humidity ≤80%RH (non-condensing)
Transmitter dimensions (LxWxH)
71 x 34 x 17.5mm
Magnet dimensions (LxWxH)
51 x 12 x 13.5mm
1. Detection window
2. LED indicator
3. Bracket
1
2
3
Infrared sensor
28
Publicité
