Caliber MCD 893 Manuel page 75

All manuals and user guides at all-guides.com
Button
Backlight Intensity at
Daytime
Backlight Intensity at Night
4.5.10 Track Log settings
You can set up an automatic Track Log saving, and fine-tune its settings. Tap the following
buttons: , ,
Button
Update Interval
Enable Auto-saving
Track Log Database Size
Track Logs Max. Size
Create NMEA/SIRF Log
74
Description
•
Backlight Always On: The screen is continuously lit.
•
Use Device Settings: The backlight settings of the device
will be applied in MCD893.
You can set the backlight level for daytime use.
You can set the backlight level for night use.
.
Description
This is how often track points will be saved. Position information
is normally received once a second from the GPS. If you do not
need such a detailed log, you can increase this number to save
track log space.
When auto-saving is enabled, you do not need to turn track log
saving on and off manually. MCD893 will automatically start
recording the track log as soon as GPS position is available.
This figure shows how much memory is used by the
automatically saved track logs.
You can set the maximum database size for the automatically
saved track logs. When the limit is reached, the oldest
automatically saved track logs will be deleted.
Independently of the normal track log, you can instruct MCD893
to record the native GPS data received from the GPS device.
These logs are saved as separate text files on the memory card,
and they cannot be shown or replayed in MCD893.