Caliber MCD 893 Manuel page 10

All manuals and user guides at all-guides.com
2.2 Hardware buttons
You can use MCD893 mostly by tapping the touch screen. The device has only a few
hardware buttons.
You can turn mobile devices on or off at any time. When mobile devices is switched off,
MCD893 does not calculate your GPS position and it does not update the route or the driving
instructions.
When you turn the device on again, MCD893 continues navigating as soon as the GPS
receiver has determined your position.
2.3 Buttons and other controls on the screen
When you are using MCD893, you usually tap buttons on the touch screen.
You only need to confirm selections or changes in MCD893 if the application needs to restart,
it needs to perform a major reconfiguration, or you are about to lose some of your data or
settings. Otherwise, MCD893 saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type Example
Button
Icon
List
Slider
Switch
Description
Tap it to initiate a function, to
open a new screen, or to set
a parameter.
Shows status information.
When you need to select
from several options, they
appear in a list.
When a feature has several
different unnamed values,
MCD893 shows an indicator
on a gauge that displays and
sets a value from a range.
When there are only two
choices, a checkmark shows
whether the feature
enabled.
How to use it
Tap it once.
Some icons also
function as a button.
Tap them once.
Turn the page with the
and
buttons and tap the
value that you want.
•
Drag the
handle to move
the slider to its
new position.
•
Tap the slider
where you want
the handle to
appear; the
thumb jumps
there.
Tap it to turn the
switch on or off.
is
9