Caliber MCD 893 Manuel page 19

All manuals and user guides at all-guides.com
2.5.2 Position markers
2.5.2.1 Current GPS position and Lock-on-Road
When your GPS position is available, MCD893 marks your current position with the
icon on the map. The exact location of the position marker depends on the vehicle type used
for route calculation.
The vehicle type can be selected in Route settings or in the Quick Menu.
•
If you choose pedestrian: The
of the icon shows your actual heading.
•
If you choose any of the vehicles: The
suppress GPS position errors. The direction of the icon is one of the directions of the
route.
To use the current GPS position, tap
the GPS position as one of the following:
•
a Favourite
•
a Road Safety Camera
•
a POI
•
a map marker Pin
2.5.2.2 Returning to normal navigation
When GPS position is available, and you have moved the map (the
not even visible), or you have rotated the map in 3D mode, the
to move the map back to the GPS position and re-enable Track-up map orientation (automatic
map rotation).
Even if you move the map while you are driving, MCD893 continues navigating
Note!
if there is an active route: it plays the voice instructions and displays the turn
preview icons according to your current GPS position.
2.5.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons
are visible, the Cursor appears at the selected point on the map. MCD893 displays the Cursor
with a radiating red dot (
background of a 3D map view.
When the Cursor is set, tap
one of the following:
•
the start point of a route
18
icon is at your exact GPS position. The direction
icon is aligned to the nearest road to
. The Position menu appears and you can save
) to make it visible at all zoom levels, even when it is in the
. The Cursor menu appears and you can use the Cursor as
icon is moving or is
button appears. Tap it