Caliber MCD 893 Manuel page 52

All manuals and user guides at all-guides.com
Symbol Name
Current GPS position
Cursor (selected
location)
Start point
Via point
Destination (end point)
Route colour
Active leg of the route
Inactive legs of the route
Streets and roads that are
excluded from the navigation
Description
Your current position displayed on the map.
•
In pedestrian mode it is the exact GPS
position.
•
If a vehicle is selected for route calculation,
the arrow is put on the nearest road.
The location selected in the Find menu, or a map
map
point selected by tapping the map.
The first point of the route.
Normally, if GPS position is available, it is the
start point of the route. If there is no valid GPS
position, MCD893 uses the last known GPS
position as the start point.
When you are using a saved route, MCD893 asks
you if you want to use your GPS position or the
first point in the saved route as the start point.
You can also modify the start point in the Cursor
menu. If you do so, the automatic off-route
recalculation needs to be turned off to keep the
selected point as the start point.
If the automatic off-route recalculation is disabled
for any of the above, tapping the
Turn Preview field not only initiates a route
recalculation from the current GPS position, but it
will re-enable the automatic off-route recalculation
as well.
A via point is an intermediate destination. You
can place as many via points as you want.
The last point of the route, the final destination.
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
The active leg of the route is always displayed in
a brighter shade than the inactive (upcoming)
legs.
The section of the route on which you are driving.
If you have not added any via points (only a
destination), the entire route is the active leg. If
you have added via points, the active leg is the
part of the route from your current location to the
next route point (the next via point, or the
destination if there are no more via points to
reach).
The future sections of the route; each of them
becomes active when you reach the via point at
its beginning.
You can choose whether you want to use or
avoid certain road
icon in the
types. However, when
51