All manuals and user guides at all-guides.com
4.5.1 Map Screen settings
You can fine-tune the appearance and content of the Map screen. Tap the following buttons:
,
,
Button
3D Settings
Colour Profiles
Elevation on 2D Map
Show Street Names
Lane Information
4.5.2 Sound settings
You can adjust the sounds of MCD893. Tap the following buttons:
.
Button
.
Description
Use 3D settings to determine which of the present 3D objects
are shown on the map, and adjust the level of 3D visual detail.
The options are as follows:
•
Landmarks:
Landmarks
representations of prominent or well-known objects. 3D
landmarks are only available in selected cities and
countries.
•
Elevated Roads: Complex intersections and vertically
isolated roads (such as overpasses or underground
tunnels) are displayed in 3D.
•
Building Visibility: Full 3D city building data that
represents actual building size and position on the map.
Building data is limited to the city centre of major cities in
the US and Europe.
•
Terrain Detail Level: 3D terrain map data shows changes
in terrain, elevations or depressions in the land when you
view the map, and use it to plot the route map in 3D when
you navigate.
MCD893 is able to show the map and the menus in different
colours during the day and during the night. Select the colour
profiles to be used in each mode, and select the automatic or
manual switching between the daytime and night colour profiles.
2D maps can also display 3D information. These top-down maps
can display elevation by colours and shading.
Street names and POI icons can be disturbing on the map
during navigation. With this switch you can suppress these map
elements when MCD893 is following your position on the map. If
you move the map, both the street names and POI icons
reappear immediately.
Some maps contain lane information to help you position your
car in the upcoming intersection. This setting tells MCD893
whether to display this information at the top or at the bottom of
the map.
Description
are
3D
artistic
or
block
,
,
67