Caliber MCD 893 Manuel page 14

All manuals and user guides at all-guides.com
Action Button(s)
Smart Zoom
Returning to
normal
navigation
(back to the
GPS
position with
automatic
map
rotation)
Zoom
preset
buttons
(available in
Advanced
mode only)
Tilt and
zoom preset
buttons
(available in
Advanced
mode only)
Map scale
Fit-to-
screen
2.4.3 Status information and hidden controls on the map
The following information appears in the rounded field in the top left corner, the Turn Preview
field. When tapping this area, the result depends on the information currently shown.
Icon Information
There is no active
route in Simple
Description
MCD893 can automatically rotate, scale and tilt the map
and give you the optimal view:
•
When you are approaching a turn, MCD893 zooms
in and raises the view angle to let you easily
recognise your manoeuvre at the next junction.
•
If the next turn is at a distance, MCD893 zooms out
and lowers the view angle to show you the road in
front of you.
Tap this button once to enable Smart Zoom.
Tap&hold the button to set the zoom limits of Smart Zoom.
Tap this button to move the map back to the current GPS
position. If the map has been rotated in 3D mode, automatic
map rotation is also re-enabled.
Tap one of the preset buttons to set the zoom level to a fix,
predefined value. Smart Zoom is disabled. These buttons
are available in 2D mode.
Tap&hold any of the buttons
zoom level, or to reset it to its original value.
Tap one of the preset buttons to set the tilt and zoom levels
to fix, predefined values. Smart Zoom is disabled. These
buttons are available in 3D mode.
Tap&hold any of the buttons
tilt and zoom levels, or to reset it to its original value.
MCD893 shows the scale of the map in 2D mode.
This button does not appear on the Map screen. It is
available on the following screens:
•
Plan on Map screen: When you have an active route,
you can display it in its full length on the map.
•
Track Information screen: A track log can be
displayed in its full length on the map.
Details
If there is no route to be Tap this area to open Find Address.
navigated in Simple
to set its value to the current
to set its value to the current
Action
13