Caliber MCD 893 Manuel page 72

All manuals and user guides at all-guides.com
Button
Compare GPS and device
times
4.5.5 Navigation settings
You can control how MCD893 behaves during navigation. Tap the following buttons:
, .
Button
Keep Position on Road
Off-route Recalculation
Restore Lock-to-Position
Automatic Overview
Description
Correction and apply a time zone offset to obtain the desired
time.
The current time of the GPS receiver and the device clock are
displayed. Please note that the GPS clock is only available with
GPS reception. This allows you to check whether any correction
is needed.
Description
This feature allows car drivers to always correct GPS position
errors by matching the vehicle position to the road network. For
pedestrian navigation, this feature is automatically disabled to let
the software show your exact position.
By turning off this feature you also turn off the GPS position
error filtering. The position shown on the map will be subject to
all position errors and position fluctuations.
This switch tells MCD893 whether to automatically recalculate
the route when you deviate from it. If this feature is turned off,
you need to initiate route recalculation manually otherwise
navigation will be stopped until you return to the originally
recommended route.
Setting another point than the current GPS position as the start
point of the active route will automatically disable this feature.
If you have moved or rotated the map during navigation, this
feature moves the map back to your current GPS position and
re-enables automatic map rotation after the given period of
inactivity.
This feature switches the map view to Overview mode when the
next route event is at a distance. Overview is a zoomed out 2D
view to let you see the surrounding area. You have the following
controls for Automatic Overview:
•
Turn Distance for Overview: The map view will be
switched to Overview mode if the next route even is at
least as far as this value.
•
Default Zoom Level: Overview mode will appear with this
zoom level. You can scale the map in Overview mode but
next time Overview appears again, this zoom level will be
applied.
,
71