Installation And Connection - Bartscher 151.510 Mode D'emploi

5.2 Installation and connection

ATTENTION!
Installation and maintenance operations may only be performed by qualified
professionals!
Installation
•
Discard the complete packing material after unpacking the device. Remove the
protective foil from the device. Ensure that it has been completely removed.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface.
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Place the device in a well-ventilated area.
•
Locate the device so that ventilation ducts are not covered or blocked.
•
Do not place the device directly next to a wall or other flammable materials. Maintain
a distance of 50 mm between the device and walls or other objects.
•
Place the device under a kitchen hood in order to ensure full expulsion of steam
arising from the preparation of foodstuffs.
•
The electric lift salamander is designed to be used on a table, but it can also be wall-
mounted.
•
When mounting the device to a wall use only supports adapted to such use. Fix the
using only metal pegs and screws appropriate to the type of wall and weight of the
device.
•
When locating the device it is necessary to take its adjustable height into account.
WARNING! Risk of fire!
Please ensure that there are no combustible materials or objects near the
installation spot. The distance kept to every side must be sufficient.
•
Do not place flammable acidic or alkaline materials near the device, as they may
shorten the device's life span as well as cause a fire hazard when the device is in use.
•
Do not place anything on the device.
•
Locate the device so that the plug is accessible.
- 23 -