Switching Time Display On/Off; Selecting 12H/24H Time Display (12Hr/24Hr Mode); Setting The Clock - Blaupunkt Hamburg MP57 Mode D'emploi

User settings

Switching time display on/off

The time can be displayed while the de-
vice is switched off, if the vehicle ignition
is switched on. To switch this time display
on/off:
In the Clock menu, press the rocker
u
=
switch or
"CLOCK ON/OFF" is displayed.
Press the rocker switch or
u
change between these settings:
•
"CLOCK ON ": The time display is
switched on.
•
"CLOCK OFF": The time display is
switched off.
Note:
Note the following if you switched on the
time display (CLOCK ON):
•
When switching off the device, the
usual "Goodbye" animation does not
appear.
•
Key combinations, e.g. for calling the
Demo mode, are no longer possible.
Selecting 12h/24h time display
(12HR/24HR MODE )
The time can be displayed using the 12-hour
or 24-hour format.
In the Clock menu, press the rocker
u
=
switch or
"12HR/24HR MODE " is displayed.
Press the rocker switch or
u
change between these settings:
46
repeatedly until
:
to
repeatedly until
:
to
•
"12HR MODE": The 12-hour format
(am/pm) is switched on.
•
"24HR MODE": The 24-hour format
is switched on.

Setting the clock

In the Clock menu, press the rocker
u
=
switch or
"CLOCK SET" is displayed.
Press the rocker switch
u
the menu.
The time is displayed.
Select the hours or minutes with the
u
rocker switch or
Press the rocker switch
u
change the hours/minutes.
Press the MENU/OK button
u
the input and store the time.
Note:
To fi nish the input without changing the
time, press the ESC/DIS
repeatedly until
:
to open
:
.
=
or to
<
to fi nish
5
button .