Selecting The Cd As Audio Source; Switching The Device On/Off; Adjusting The Volume - Blaupunkt Hamburg MP57 Mode D'emploi

Startup
The display briefl y shows "READING DISC".
Next, the following appears:
•
The audio CD display if an audio CD is
inserted.
•
The MP3 display if an MP3 or WMA CD
is inserted.
The CD starts playing.

Selecting the CD as audio source

You can select an inserted CD as audio
source:
Press the SOURCE button
u
ly until the desired display appears.
Note:
The CD mode can be selected only if a
readable CD is inserted.
To operate the audio CD display, please read
the chapter "CD mode (audio)".
To operate the MP3 display, please read the
chapter "CD/USB mode (MP3/WMA)".

Switching the device on/off

The device is switched on or off with the igni-
tion. The introductory animation starts and
can be cancelled with the MENU/OK button
<
. The device plays the audio source you
previously listened to.
To manually switch on the device:
Press the On/Off button
u
To switch off the device:
Press and hold the On/Off button
u
approx. two seconds.
16

Adjusting the volume

Excessive volume can damage your hear-
ing and you may fail to hear acoustic warn-
>
repeated-
ing signals!
y
y
u
3
.
3
for
Note:
To protect the vehicle battery if the igni-
tion is switched off, the device automati-
cally switches off after one hour.
DANGER!
High volume
The devices mutes itself while it chang-
es the CD in the CD changer or the au-
dio source. During this mute phase, the
volume may be changed, but it is not au-
dible. Do not increase the volume dur-
ing a mute phase
Always set the device to a moderate vol-
ume.
Turn the volume control
The current volume is shown on the dis-
play and used for all audio sources.
Notes:
•
The volume can also be changed
during a phone call/navigation an-
nouncement using the volume control
4
for the duration of the phone call
or the announcement.
•
During phone calls/navigation an-
nouncements, you can adjust the vol-
ume distribution for the phone call or
the announcement. For further de-
4
.