Note:
The "UNPAIR" function is active only if
the car sound system is currently con-
nected with the cell phone to be unreg-
istered.
Answering/rejecting a phone call
If you are receiving a call, the display shows
"INCOMING CALL" and the phone number of
the caller. The active audio source is muted
and the ring tone is sent to the loudspeak-
ers.
In case of an incoming call, you must answer
or reject the call. At this time, it is not possi-
ble to perform another operation using the
car sound system.
To reject the call:
Press the
button
u
The display shows "CALL ENDED".
To answer the call:
Press the
button
u
The display shows "IN-CALL".
Your caller's voice is broadcast via the loud-
speakers.
During the phone call, you can change the
volume by means of the volume control
Note:
To answer/reject calls, use only the de-
scribed buttons of the car sound sys-
tem.
If you use the corresponding buttons of
the phone, the behaviour of the radio
may differ from phone to phone. The
reason is the software differences of the
cell phones.
8
.
7
.
4
.
Bluetooth phone call
Making a call (DIAL NEW )
There are two ways of making a phone call
via the car sound system:
•
Entering a phone number
•
Dialing a stored phone number (sec-
tion "Storing and calling up a phone
number")
To enter a phone number and make a call:
Press the MENU/OK button
u
Press the rocker switch
u
repeatedly until "BLUETOOTH MENU"
appears on the display.
Press the rocker switch
u
the menu.
Press the rocker switch
u
repeatedly until "DIAL NEW" appears on
the display.
Press the rocker switch
u
the phone number input.
Now you can enter a phone number:
Press the rocker switch
u
to select a number. The numbers are
scrolled from 0 to 9.
Select the next digit with the rocker
u
:
switch
to enter the next number.
If you entered the wrong number, you
can delete the characters by pressing
and holding the rocker switch or
Press the
button
u
call.
The display shows "CALLING" and the se-
lected phone number.
<
.
=
or
:
to open
=
or
:
to display
=
or
:
.
8
to make the
39