Publicité
RDN 902BTi
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting
service. If the problem remains unsolved, please contact your dealer.
No power
∙ Car engine has not been started. Start the car engine.
∙ Connections are incorrect.
∙ Fuse has been damaged. Replace the fuse.
No sound
∙ Volume is too low. Adjust volume.
∙ Speaker connections are incorrect.
No response to the remote control
∙ Ensure that the path between the remote control and the unit is clear from obstacles.
∙ From a close distance, point the remote control directly to the unit.
∙ Replace the remote control battery.
∙ The function does not work. Refer to the instructions.
Disc does not play
∙ Disc is upside down. Ensure the printed side is upward.
∙ Disc is dirty. Clean the disc with a clean, soft, lint-free cloth. Wipe the disc outwards
from the center.
∙ Disc is defective. Try another disc.
∙ Incompatible disc is used. Try another disc.
∙ Disc rating exceeds the restrict setting. Change the rating settings to lower one.
∙ Disc region code is not compatible with the unit. Use disc with proper region code.
No image
∙ Parking brake wire connection is incorrect. Check the parking wiring.
Image flashes or distorted
∙ Video DVD settings do not match with the DVD. Adjust video DVD settings.
∙ Video connection is improper. Check the connection.
Noise in broadcasts
∙ Signals are too weak. Select other stations with stronger signals.
∙ Check the connection of the car antenna.
∙ Change broadcast from stereo to mono.
Preset stations lost
∙ Battery cable is not connected right. Connect the battery cable to the terminal
that is always live.
All manuals and user guides at all-guides.com
TROuBLEShOOTING
Troubleshooting
Publicité
