Publicité
Les langues disponibles
Les langues disponibles
Signal individual protection device
HAND PROTECTION
(gloves for protection against chemical, ther-
mal and mechanical risks).
5. TRANSPORTATION AND HANDLING
The product is packed to maintain the content intact.
During transportation avoid to stack excessive wei-
ghts. Ensure that during the transportation the
packed cannot move.
The transport vehicles must comply, for the weight
and dimensions, with the chosen product.
5.1 Handling
Handle with care, the packages must not receive
impacts.
Avoid to impact onto the package materials that
could damage the pump.
h
max
h
If the weight exceeds 25 Kg the package must be
min
handled by two person at the same time.
3.93.037/3
min 300 x 250
6 INSTALLATION
6.1 Dimensions
For the dimensions of the device see technical cata-
logue.
6.2 Ambient requirements and installation site
dimensions
h
The customer has to prepare the installation site in
min
order to guarantee the right installation and in order to
3.93.037/3
fulfill the device requirements (electrical supply,
min 300 x 250
etc...).
It's Absolutely forbidden to install the machine in an
environment with potentially explosive atmosphere.
6.3 Unpacking
Inspect the device in order to check any
i
damages which may have occurred during
transportation.
Package material, once removed, must be discar-
ded/recycled according to local laws of the destina-
tion country.
6.4. Pipes
The internal diameter of the delivery pipe must never
be smaller than the diameter of the pump connection
port:
G 1
1
/
(DN 40) for ED, EDV, EGN;
2
G 2
(DN 50) for EGT, EGF;
ATTENTION: The pump must be lifted and
transported using the handle fitted for this
purpose and not pulled by the electrical power
cable.
Place the pump, with vertical axis, at the bottom of
the pit or at the site of installation.
ED, EG Rev. 2 - Operating Instructions
All manuals and user guides at all-guides.com
mm
h
h
min
max
GQRM 10-10 GF
225
315
GQRM 10-12 GF
240
330
GQRM 10-14 GF
240
330
265
355
GQRM 10-16 GF
285
375
GQRM 10-18 GF
mm
h
h
min
max
GQRM 10-10 GF
225
315
GQRM 10-12 GF
240
330
h
max
GQRM 10-14 GF
240
330
GQRM 10-16 GF
265
355
285
375
GQRM 10-18 GF
6.5. Stationary installation
EGN
On
4.67.380
Off
h
max
h
min
min 550 x 550
mm
TYPE
h
h
max
min
TYPE
EDV 5
508
248
EDV 7
ED 5
533
273
EDV 9
ED 9
533 273
Installation fit a check valve against back flow in the
h
delivery pipe ball valve (swing valve for EGN).
max
h
Provide for the possibility of removing the pump
min
without having to drain the entire system (if
necessary, fit a gate valve and a union coupling).
min 550 x 550
With the pump in the resting position secure the
delivery pipe to a rest, suitable for its length and
mm
h
h
weight.
max
min
If slime deposits are expected to form at the bottom
GXV(M) 40-7
508
248
GXV(M) 40-8
533
273
GXC(M) 40-10
of the installation pit, a support must be provided to
GXV(M) 40-9 533 273
GXC(M) 40-13
keep the pump raised.
6.6. Transportable installation
To avoid early deterioration of the pump when used
in stagnant water or in rivers, mount on a flat surface
raised from the ground so that sand or grit is not lif-
ted.
When a plastic delivery pipe or flexible hose is used,
a rope is required for lowering, securing and lifting
the pump.
A safety rope or chain of non-perishable material
should always be used to secure the pump.
1
mm
h
h
TYPE
min
max
M
EGN 4
205
410
1
EGN 5
220
425
EGN 7
220
425
EGN 9
245
450
EGN 11
265
470
EGN 15
265
470
3.93.037/3
GQR
mm
h
h
TYPE
min
max
EGT, EGF 5
260
515
mm
h
h
EGT, EGF 7
275
530
max
min
EGT, EGF 9
300
555
508
248
EGT, EGF 11
320
575
533
273
EGT, EGF 15
320 575
3.93.037/3
mm
h
h
min
max
GQS, GQV 50-9
260
515
mm
h
h
GQS, GQV 50-10
275
530
max
min
GQS, GQV 50-11
300
555
508
248
GQS, GQV 50-13
320
575
GQS, GQV 50-15
320 575
533
273
3.93.004/1
3.93.004/1
Page 11 / 80
GB
GMC 50...
GMV 50...
GMC 50-65..
GMC 50-65..
GQR 10-10
GQR 10-12
GQR 10-14
GQR 10-16
GQR 10-18
GQR 10-20
Publicité
