Télécharger Imprimer la page

Angelcare AC300-D Mode D'emploi page 36

Publicité

Les langues disponibles

Les langues disponibles

products or solvents. Wipe Sensor Pad
with a cloth moistened very slightly with
an antiseptic or mild detergent.
12.7 Ventilation - DO NOT block any
ventilation openings. Allow for proper
ventilation when unit is in use. DO NOT
cover the Nursery Unit with any object
such as a blanket. DO NOT place it in a
drawer or in any location which would
muffle the sound or interfere with the
normal flow of air.
12.8 Heat sources - DO NOT install near
any heat sources such as radiators, heat
registers, stoves, TVs or other apparatus
(including amplifiers) that produce heat.
Heat can damage the case or electrical
parts.
12.9 Power cord protection - Protect the
Sensor Pad cord from being walked on
or pinched by furniture or other items –
Power supply cords should be routed so
that they are not likely to be walked on or
pinched by items upon or against them,
paying particular attention to cords and
plugs, convenience receptacle, and the
point where they exit from the product.
12.10 Accessories - Only use attachments/
accessories specified by the manufacturer.
DO NOT place this product on an unstable
cart, stand, tripod, bracket or table. The
product may fall, causing serious injury
to a child or adult and serious damage to
the product. Use ONLY with a cart, stand,
tripod, bracket or table recommended by
the manufacturer or sold with the product.
Any mounting of the product should follow
the manufacturer's instructions.
12.11 Ser vicing - DO NOT attempt to
service this product yourself as opening
or removing covers (except battery doors)
may expose you to dangerous voltage or
other hazards.
12.12 R e p l a c e m e n t
replacement parts are required, be sure
the replacement parts specified by the
manufacturer have the same characteristic
a s th e o r i g i n a l p a r t . U n a u th o r ize d
substitution may result in fire, electric
shock or other hazards.
12.13 U s a g e - Th is b a by m o n ito r is
intended as an aid. It is NOT a substitute for
responsible and proper adult supervision
36
All manuals and user guides at all-guides.com
and should not be used as such. Use this
appliance ONLY for its intended use as
described in this manual.
12.14 Object and Liquid Entry - NEVER
push objects of any kind into this product
through casing slots as they may touch
dangerous voltage points or short out
parts that could result in a risk of fire or
electric shock. NEVER spill liquid of any
kind on the product.
12.15 W A R N I N G
HAZARD – Children have STRANGLED in
cords. NEVER use Sensor Pads without the
damaged or broken.
12.16 Vibration Source - When the monitor
is in use, DO NOT use a crib mobile or
other crib accessories that may produce
vibrations. Other sources of vibrations
may include fans, washing machines, loud
music, etc. These sources of vibration may
interfere with the performance of your
Angelcare
not sound if it continues to detect any
movement other than your baby's. Be sure
all vibration sources are eliminated before
using the monitor.
You may experience false alarms for several
reasons. The most common reason is the
Nursery Unit has not been turned OFF after
you have removed your baby from the crib.
Another reason is the Sensor Pad has not
been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm
surface with the printed side facing up.
The sensitivity level may also need to be
adjusted. Refer to step 3.1. Always be sure
p a r t s
-
W h e n
to immediately check on baby whenever
an alarm sounds.
12.17 Sensor Pad - If the crib has a spring or
slat base, place a hard board between the
crib base and the Sensor Pad measuring at
least 33 x 33 cm and 6 mm thick. Only use
your Angelcare
sleeping environment such as a crib where
the Sensor Pad can rest on a completely
flat, firm surface.
Der Schutzengel im Kinderzimmer
AC300-D
S T R A N G U L AT I O N
p r o t e c t i v e
c o v e r i n g .
p r o t e c t i v e
covering before each
u s e .
I m m e d i a t e l y
d is co nti n u e
S e n s o r
P a d s
protective covering is
®
monitor and the alarm will
monitor in a stationary
®
c o r d
C h e c k
c o r d
u s e
of
i f
®

Publicité

loading