Sgen Model Installation - Hatco SGPT-24 Manuel D'installation Et D'utilisation

INSTALLATION

SGEN Model Installation

1. Place each post in the desired location and secure the legs
into the countertop.
• move the mounting covers to access the mounting
holes.
• Use the "mounting Template" located in the aDDENDUm
section at the end of this manual.
2. Secure the back glass to the outside of each post.
a. Insert the mounting bolt through post.
b. Place a glass mount then a glass bushing onto the bolt.
c. Slide the glass onto the bolt and secure using nut.
d. Repeat on the three remaining back glass holes.
3. Secure the side glass to the outside of each post.
a. Place a glass bushing between the side glass and the
post.
b. Hold the side glass clamp onto the post.
c. Tighten the bolt into the clamp through the top hole of
side glass.
d. Repeat on the three remaining side glass holes.
e. Repeat this step on the opposite end.
Mounting Nut
SGEN model Installation
4. Secure the top glass to the top of each post.
a. Insert the mounting bolt through post from underneath.
b. Place a glass mount and glass bushing onto the bolt.
c. Slide the glass onto the bolt and secure using nut.
d. Repeat on the three remaining top glass holes.
Mounting Nut
Glass Bushing
Glass Mount
Glass Bushing
Glass
Clamp
Mounting
Bolt
Mounting
Cover
Countertop
Mounting
Screw
8
English
Mounting
Bolt
Form No. SGm-0815