Model Description - Hatco IRNG Série Manuel D'installation Et D'utilisation

IMPORTANT SAFETY INFORMATION
NOTICE
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
Do not locate unit in area with excessive air movement
around unit. Avoid areas that may be subject to active air
movements or currents (i.e., near exhaust fans/hoods, air
conditioning ducts, and exterior doors).

MODEL DESCRIPTION

All Models
Hatco P Type Induction Ranges are equipped with a single
induction coil underneath a ceramic glass cooking surface.
Each model features a glass touch control panel with a
Function Button, a Timer Button, a Control Knob, and a Control
Display. All P Type Induction Ranges include an attached
71" (1800 mm) power cord with plug.
NOTE: Refer to "Pan Specifications" in the OPERATION section
of this manual for details on "induction-ready" pans,
pans not suitable for induction cooking, and pan sizes.
Hatco P Type Induction Ranges have several safeguards built
into each unit that ensure protection to the unit as well as the
operators.
• A cross-flow fan ventilation system ensures that the
electronic circuits in the unit do no overheat. Temperature
probes monitor the electronic circuits and will signal the
unit to shut down if the circuits get too hot.
• A temperature probe in the cooking zone monitors the zone
temperature. This probe detects overheating in the cooking
zone due to an empty pan.
• Electronic circuitry in the cooking zone detects when a
small, ferrous object (such as a fork, spoon, or ring) is
placed on the unit, and the unit will not operate.
Countertop Models
Countertop P Type Induction Ranges models are portable,
countertop induction ranges.
Ceramic
Glass
Cooking
Surface
Timer
Button
Function
Button
P Type Countertop Model
Control
Power/Control
Display
Knob
This unit is intended for commercial use only—NOT for
household use.
Built-In Models
Built-In P Type Induction Ranges are designed to be installed
into a variety of solid material countertops. The unit includes a
remote control panel that connects to the induction range with
detachable control cables that combine for a total length of 55"
(1400 mm).
Ceramic
Glass
Cooking
Surface
Timer
Button
Function
Button
P Type Built-In Model
NOTE: For the latest firmware updates, cooking tips, and
more, go to the Hatco Induction Range website:
www.hatcocorp.com/rapide_cuisine
4
English
NOTICE
Remote
Control
Panel
Control
Cable
Control
Power/Control
Display
Knob
Form No. IRNGM-1120
Control
Cable