Publicité
Les langues disponibles
Les langues disponibles
45
Command Delay 1
c.de. 1
Command delay (only in ON / OFF functioning).
mm:ss. Default:
-
: .. :
Negative: delay when turning off output.
Positive: delay when turning on output.
46
Command Setpoint Protection 1
c.S.p. 1
Allows or not to modify command setpoint value
Modification allowed (Default)
FrEE
Protected
Lock
Free Initialized. At start, setpoint 1 of command 1 is initialized to the value set on
FR.iN.
parameter 51
48
Automatic / Manual 1
a.ma. 1
Enables the automatic/manual selection for command
Disabled (Default)
diSab.
Enabled
Enab.
Enabled with memory
En.Sto.
49
Initial State
ini.S.
Choose the state of the controller when turning it on. This only works on the RS
enabling the Start/Stop from digital input or
Start (Default)
Start
Stop
stop
Stored. State of Start/Stop prior to switching off.
Store.
51
Initial Value Setpoint 1
i.SP. 1
Determines the initial value (at start) of setpoint of command when
parameter
c.S.p .1
-
..+
52÷53
Reserved Parameters - Group C
Reserved parameters - Group C
22 - ATR224 - DRR224 - User manual
: .
(Initial Value Setpoint 1).
i.SP .1
(Command Setpoint Protection )
[digit
] (degrees for temperature sensors). Default .
p.
SET
button.
version or by
is selected on
FR.iN.
Publicité
