Pixsys ATR224 Manuel Utilisateur page 11

ATR224-12ABC
Shield/Schermo
Rosso
19
Red
Bianco
18
AI1
White
Rosso
17
Red
DRR224-12ABC
Shield/Schermo
Rosso
13
Red
Bianco
14
AI1
White
Rosso
15
Red
ATR224-12ABC
Shield/Schermo
17
AI1
18
DRR224-12ABC
Shield/Schermo
15
AI1
14
ATR224-12ABC
16
+V
18
AI1 V mA
19
Shield/Schermo
DRR224-12ABC
16
+V
14
AI1 V mA
13
Shield/Schermo
For thermoresistances PT100, Ni100.
• For the three-wire connection use wires with the same section.
• For the two-wire connection short-circuit terminals 17 and 19 for ATR224
and terminals 13 and 15 for DRR224.
• When shielded cable is used, it should be grounded at one side only.
RED/ROSSO
WHITE/BIANCO
RED/ROSSO
For thermoresistances NTC, PTC, PT500, PT1000 and linear potentiome-
ters.
When shielded cable is used, it should be grounded at one side only to avoid
ground loop currents.
For linear signals in Volt and mA
• Comply with polarity
• When shielded cable is used, it should be grounded at one side only to
avoid ground loop currents.
• It's possible to select +V at 12Vdc or 24Vdc, by configuring parameter 282
(GROUP R -
.out
- Display and interface).
diSP.
User manual - ATR224 - DRR224 - 11