Motorola CD4001 Mode D'emploi page 19

4. Phonebook
You can store up to 50 names and numbers in the phonebook. Names can be up
to 16 characters long and numbers up to 24 digits.
4.1 Store a name and number
If the phone is connected to a switchboard, you may need to enter a pause in a
stored number. This gives the switchboard time to find an outside line. A pause is
normally stored after the switchboard access code (e.g. 9).
When storing a number, press and hold
continue storing the phone number.
If you have subscribed to Caller ID Service and wish to display the name of your
caller as well as the number, save the full telephone number including the area
code to your phonebook.
You can store multiple entries with the same name. However, to prevent
unnecessary duplicated entries, you can only store the same number once.
M
1. Press . The display shows Phonebook.
M
2. Press . Scroll
M
3. Press . The display shows
4. Enter the name and press
5. Enter the number and press
Entering names
Use the keypad letters to enter names, e.g. to store Tom:
Press 8 once to enter T.
6
Press three times to enter o.
Press 6 once to enter m.
Writing tips
b
Press to delete the last character or digit.
u
d
Press or to move between characters.
0
Press to insert a space.
4.2 View or dial an entry
d
1. Press .
u
d
2. Scroll or to the entry you want.
OR
Enter the first letter of the name to search alphabetically.
The first name that starts with this letter or the nearest letter in the alphabet
will be displayed. Scroll
T
3. Press to dial or
Phonebook
d
to Add new.
Enter
M
. The display shows
M
to save.
u
d
or to the entry you want.
e
to return to standby.
H
until the display shows P. You can then
name.
Enter number.
19