Burkert 8400 Manuel D'instructions page 14

All manuals and user guides at all-guides.com
Wall-mounted Temperature Controller
5 PROGRAMMING
5.1 General recommendations
Keep in mind that the process may be influenced by all the parameter
settings you make. Fill-in the table on page 20 with your settings of the
controller 8400.
5.2 Functionalities
The device has three operating modes :
Normal Mode
Display of the measured temperature and the switching thresholds
programmed. From the Normal mode, you can access the Calibration
and Simulation modes.
Calibration Mode
Access to the programming of all the parameters (unit, output, filter, bargraph,
temperature adjustment). From the Calibration Mode, you can go back to the
Normal Mode.
Simulation Mode
Entering a theoretical temperature value to test the configuration
programmed in the Calibration Mode. From the Simulation Mode, you
can go back to the Normal Mode.