4
INSTALLATION
40 mm
ø 7,4 mm
ø 4,7 mm
All manuals and user guides at all-guides.com
4.1 General recommendations
Always check the chemical compatibility of the materials the controller
is made of with the products it may be in contact with, for instance:
alcohols, strong or concentrated acids, aldehydes, bases, esters,
aliphatics, aromatics, ketones, aromatics or halogenated hydrocarbons,
oxidizing agents and chlorinated products.
For more information, please contact your Bürkert sales office.
4.2 Mounting
- Select the location of the holder on a wall, then drill 4 holes by
respecting the hole-to-hole distances indicated on the opposite
schematic and mount the holder using 4 screws.
- Insert the controller in the holder as shown in the figure below.
Wall-mounted Temperature Controller
8400
3
1
2