SilverCrest STC 920 A1 Mode D'emploi page 22

Items supplied
The appliance is delivered with the following components as standard:
▯ Toaster
▯ Bread roll rack
▯ Operating instructions
1) Remove the appliance and the operating instructions from the carton .
2) Remove all packing material .
NOTICE
► Check the contents to ensure everything is present and for visible damage .
► If the delivery is not complete or has been damaged due to defective
packaging or transportation, contact the Service Hotline (see section
Service) .
Disposal of the packaging
The packaging protects the appliance from transport damage . The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable .
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated . Dispose of packaging material that is
no longer needed as per the regionally established regulations .
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can pack the appliance
ideally for its return .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
STC
920 A1 GB │ IE │ 19
■