Publicité
All manuals and user guides at all-guides.com
f) Checking and setting the tracking
Once you have made all the necessary settings on the transmitter and the mechanics, you can now reconnect the
motor to the flight control and check the tracking.
Set an exact track on the two linkage rods A and B (also see ill. 18, pos A and B) for the auxiliary paddle and the rotor
blades.
A
B
Figure 20
g) Checking and setting the tail rotor
For an exact description of the correct fine-tuning of the tail rotor, refer to the documentation of your piezo gyro. If
necessary, you can optimise the setting by simply shifting the tail rotor servo on the tail pipe.
47
Publicité
