Publicité
Les langues disponibles
Les langues disponibles
32
6.0 FINISHING
EN
THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALS
SUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT GO
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
6.1
DOOR CLOSING AND OPENING
Open the valve control door. Hook the top and bottom door latches, located
at the right side of the door into the corresponding slots in the door.
The door latch holes are elongated for door levelling. To level the door, it
may need to be lifted up at the right side before latching to ensure the door
is level.
6.2
LOG SHIPPING BRACKET
Before installing the logs, you must fi rst remove the log ship-
ping bracket. Loosen the securing screw indicated. Slide the
bracket to the right and lift up to remove.
6.3
DECORATIVE PANELS
This appliance does not include decorative brick panels, however, panels are required.
Panel kits are sold separately. Consult your local authorized dealer / distributor. See "REPLACEMENT PARTS
- ACCESSORIES" section.
6.4
CHARCOAL STRIPS
The charcoal strips have been shipped in place. Protective foam must be removed before operation.
W415-1103 / A / 08.07.13
All manuals and user guides at all-guides.com
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
BELOW THE SPECIFIED DIMENSION AS ILLUSTRATED.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
WARNING
!
RISK OF FIRE!
SCREW
72.1A
LOG SHIPPING
BRACKET
Publicité
