Angelcare Babyphon AC720-D Manuel D'instructions page 61

5.2 ­ ECO MODE
Allows you to reduce the electro-smog.
TO ACTIVATE ECO MODE:
1
In Standby mode, when the ECO mode is ON, the
radio frequency transmission of the Nursery and the
Parent Units are completely OFF. In other words, there
is no electromagnetic emission in standby mode. The
radio transmission will turn back ON if one of the
following event happens:
1. The settings are adjusted via the parent unit screen
2. The VOX activates
3. The night light or the Pager are activated via the
nursery unit
4. The temperature alarm goes ON. In this case, the
temperature will show again on the screen until the
alarm stops.
Please note that in ECO standby mode, the out of range warning tone alarm is disabled, but if the
Radio Frequency transmission turns ON, because of one of the four events above, the out of range
alarm will be triggered, if the parent and nursery units are not linked at that time.
The monitor will automatically return to standby mode with zero electromagnetic emission in
approximately 45 seconds after the end of the events above. Similarly, 45 seconds is needed after
activating the ECO mode manually on the parent unit screen for the standby mode to be ON.
5.3 ­ TEMPERATURE CONTROL
TO CHANGE THE MEASUREMENT UNIT:
1
All manuals and user guides at all-guides.com
2
3
C/F
1) Press the Settings icon to access
2) Press C/F icon.
3) Press C/F icon to change from Celsius
4
2
4) Press the Return icon to confirm your
C/F
Der Schutzengel im Kinderzimmer
AC720-D
1) Press the Settings icon to access
setting mode.
2) Press the ECO icon to activate
or deactivate the ECO function.
ON
3) Press the Return icon to confirm your
choice and return to normal screen.
NOTE: When the ECO mode
is set ON, a small ECO icon
appears beside the antenna
icon and:
1. the signal strength bar is
OFF
2. the Temperature display is
OFF but the temperature
alarm will remain working if
selected
setting mode.
to Fahrenheit.
C/F
choice and return to normal screen.
E
N
OFF
61
07/14
®