Angelcare Babyphon AC720-D Manuel D'instructions page 56

STEP 3 ­ TURNING ON YOUR MONITOR
1
When the Parent Unit is turned
ON and the Nursery Unit is OFF,
the Parent Unit will be searching
for connection with the Nursery
Unit. The Connection icon will scan
in the following cycle.
IMPORTANT ICONS
Temperature icon:
Indicates room temperature
Battery Level icon:
Indicates battery level
Empty
1/3 Full
2/3 Full
Full
Settings Icons: Access to settings
ECO icon: Indicates ECO function
is active*
Temperature Alarm icon: Indicates
Temperature Alarm is active
56
All manuals and user guides at all-guides.com
2
Der Schutzengel im Kinderzimmer
AC720-D
1) Press the Parent Unit ON/OFF button
to open and display normal mode.
2) Push and hold the Nursery Unit
left 'wing' button for 2 seconds.
The LCD monitor has 30 second
timeout and then will go to power
saving mode (dimmer illumination).
Press any key to wake up.
If there is a lost connection
between the 2 units
(refer to troubleshooting):
• The Out­of­Range icon
will appear on the screen and
the Parent Unit will beep.
For more informationen on the out
of range indicator function, please
refer to page 52.
Sound icon: Indicates sound
is active
Level Bar: Indicates sound level
from Nursery Unit.
Connection icon: Indicates
the connection quality between
the Parent Unit and Nursery Unit.
Good connection
Fair connection
Poor connection
Out-of-Range
*In ECO mode, there is no signal
strength bar
®