Roland Edirol AUDIOCapture UA-1D Mode D'emploi page 15

fig.02-13.e
10
Next, a USB Audio Device
will be detected
automatically, and the Add
New Hardware Wizard
dialog box will appear.
Click [Next], and continue
the installation using the
very same procedure as in steps 3 – 6 (p. 13).
fig.02-14.e
11
When installation of the
USB Audio Device driver
is finished, the following
dialog box will appear.
Click [Finish].
This completes installation of
the USB Composite Device
driver and the USB Audio Device driver. Restart Windows.
After installing the driver, refer to Specifying the audio
input/output device (p. 15) and select the device Windows
uses. After that, refer to Installing and Using the D-Out
Smoother (p. 19) to install the D-Out Smoother on your
computer.
Specifying the audio input/output device
1
Click the Windows [Start] button, and select
[Settings] - [Control Panel].
2
Win 98:
In Control Panel, double-click the [Multimedia] icon to open
the Multimedia Properties dialog box.
Win 2000 / Me:
In Control Panel, double-click the [Sounds and
Multimedia] icon to open the Sounds and Multimedia
Properties dialog box.
* If you don't find a [Sounds and Multimedia] icon, then in Control
Panel, click [view all Control Panel options].
Connections and driver installation (Windows)
15