Roland Edirol AUDIOCapture UA-1D Mode D'emploi page 17

Volume Control settings
The output volume of the UA-1D can be controlled by the
Windows Volume Control.
1
Click the Windows [Start] button, and select
[Programs] - [Accessories] - [Entertainment] -
[Volume Control] to start it up.
Windows Me
fig.02-17.e
2
You can raise or lower the slider to adjust the volume
of the UA-1D. The following items can be set.
WAVE
SW Synth
CD Player
*1 If the playback of the CD does not change when you
adjust this volume, change the WAVE volume.
Windows 2000/
Windows 98
Adjust the volume that is output from the
audio output device "USB Audio Device."
Adjust the volume of the software
synthesizer built into Windows.
Adjust the "CD Music" volume for the
CD-ROM drive of your computer.(*1)
Connections and driver installation (Windows)
If Volume Control is not
installed on your
computer, use Add/
Remove Applications in
the Control Panel to
install it. For details on
installation, refer to the
Windows owner's manual
or Help.
The audio quality of the
UA-1D will be better if you
raise the Volume Control
levels.
If Mute is checked, or if the
slider is in the lowest
position, no sound will be
output from the UA-1D.
If you are using
Windows 2000 and "CD
Player" does not appear,
check the [Digital CD
playback] item "Enable
digital CD audio for this
CD-ROM device," as
described in the cautionary
note on the following page.
17