Publicité
Les langues disponibles
Les langues disponibles
EN
Note: It can be set to automatically turn off or on in 0.5-24 hours. Each
press of the "
" "
"buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10 hours and 1 hour
increment for 10 hours or above. The SET light will turn on while setting.
To cancel the set function, press the TIMER button again.
6. Auto Mode: In AUTO mode the unit automatically chooses the mode
of operation(COOL,DRY or FAN). In this mode the temperature will be
set automatically according to the room temperature (tested by the
temperature sensor which is incorporated in the indoor unit.).
7. Fan Speed: Press the FAN SPEED button to choose the fan speed
options. You can choose High, Med, Low or auto speed in COOL mode
and choose High, Med, Low in FAN mode.
8. Display: To press the DISPLAY button, it can switch off/on all lights or
LED display.
9. Eco: When the unit is in ECO mode, the light will turn on. In ECO
mode, the unit will turn off once the room is cooled to the user set
temperature. The unit will turn back on when the room temperature
rises above the user set temperature. Before the compressor starts, the
fan motor will run for a while, then it will stop for a while, and will
repeat to provide a much more comfortable feeling and save energy.
10. Fan Only: Press the Fan Only button to FAN ONLY mode.
Battery Size: AAA- NOTE: Do not mix old and new batteries or different
types of AAA batteries.
CARE AND CLEANING
Clean your air conditioner to keep it looking new and to minimize dust
build up.
Air Filter Cleaning
The air filter should be checked at least once every month to see if it
needs cleaning. Trapped particles and dust can build up in the filter and
may decrease airflow as well as cause the cooling coils to accumulate
frost. To clean the air filter:
1. Remove the filter by pulling down on the indents of the filter door on
the front of the unit. (See FIG.15)
21
Publicité
