Publicité
Les langues disponibles
Les langues disponibles
EN
Auto Mode: In AUTO mode the unit automatically chooses the fan speed
and the mode of operation (COOL,DRY or FAN).In this mode the fan
speed and the temperature are set automatically according to the room
temperature (tested by the temperature sensor which is incorporated in
the indoor unit.).
5. Timer Button: Use these buttons on the control panel and remote to
set the Timer.
Timer Off: The timed stop is programmed by pressing TIMER button. Set
the rest time by pressing the button"
"or"
" until the rest time
displayed is to your demand then press TIMER button again.
Timer On: When the unit is off, press TIMER button at the first time, set
the temperature with pressing the button"
"or"
". Press TIMER button
at the second time, set the rest time with 6 pressing the button"
", or
"
". Press TIMER button at the third time, confirm the setting, then the
rest time to next automatical switching-on could be read on the display
of the machine.
Note: It can be set to automatically turn off or on in 0.5-24 hours. Each
pressof the" " "
" buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10 hours and 1 hour
increment for 10 hours or above.
The SET light will turn on while setting.
To cancel the setted function, press the TIMER button again.
18
Publicité
