Publicité
Les langues disponibles
Les langues disponibles
EN
2. Keep a firm grip on the air conditioner, carefully place the unit into
the window opening so the bottom of the air conditioner frame is against
the window sill (FIG. 6). Carefully close the window behind the top rail of
the unit. ( Suggest to keep a downward oblique, to let accumulated rain
water to drain out, from back side of the unit bottom.)
3. Extend the side panels out against the window frame (FIG. 7).
4. Place the frame lock between the frame extensions and the window
sill as shown Fig. 8). Drive 3/4"(19 mm) locking screws through the
frame lock and into the sill (FIG.9). NOTE: To prevent window sill from
spltting, drill 1/8"(3 mm) pilot holes before driving screws.
FIG. 8
FIG. 6
FIG. 7
12
FIG. 9
Publicité
