5. Ordinateur
5.1 Clés d'ordinateur
MANUEL:
Programme manuel, dans lequel vous pouvez modifier la
résistance par vous-même.
PROGRAMME HAUT / BAS:
Affiche le profil de chaque programme.
UTILISATEUR 1/2:
Activez les profils autodéfinis.
HRC 1/2:
Activer les programmes de stimulation cardiaque
ENTRER:
En appuyant sur cette touche, une fonction peut être confirmée.
UP / DOWN:
Augmentation / diminution des valeurs ainsi que la résistance.
Une pression plus longue déclenchera la recherche automatique
des valeurs.
START / DÉMARRER:
Appuyez sur START et l'exercice commencera.
STOP / RESET:
Arrête l'exercice. Pendant le mode d'exercice, ssi vous appuyez
une fois sur la touche, la fonction de pause est activée pendant 5
minutes, en appuyant deux fois arrêtera votre exercice. Si vous
appuyez sur cette touche pendant 3 secondes, une
réinitialisation est déclenchée et l'écran de démarrage s'affiche.
Pendant la saisie de données pour un programme, la touche
Arrêt exécute une fonction d'écran précédent ou de segment.
Cela vous permet de revenir en arrière pour modifier les
données de programmation.
VENTILATEUR:
Activer ou désactiver le ventilateur
Prise USB Uniquement pour la recharge des appareils
électroniques!
All manuals and user guides at all-guides.com
13
5. Computer
5.1 Computer keys
MANUAL:
Manual program, in which you can change the resistance by
yourself.
PROGRAM UP/DOWN:
Shows the profile of each program.
USER 1/2:
Activate the self defiened profiles.
HRC 1/2:
Active the heartrate programs
ENTER
By pressing this key, a function can be confirmed.
UP/DOWN:
Increase/decrease of values as well the resistance. A longer
press will start the automatic value finder.
START:
Press START and the exercise will beginn.
STOP/RESET:
Stops the exercise. during exercise mode, if you
pressing it once, the pause function is activated for
five minutes, pressing twice will stop your exercise. If
you press it for three seconds,
it will cause a reset, and the display shows the starting
window.During data entry for a program the Stop key
performs a Previous Screen or segment function. This allows
you to go back to change programming data.
FAN:
Activate or deactivate the fan
USB Plug: The plug is only for charging electronic devises!