Télécharger Imprimer la page

Eccotemp SH22 Manuel page 35

Masquer les pouces Voir aussi pour SH22:

Publicité

Les langues disponibles

Les langues disponibles

Insulation Blankets
WARNING: If
WARNING: If
local codes require
local codes require
external application of
external application of
insulation blanket kits
insulation blanket kits
the manufacturer's
the manufacturer's
instructions included
instructions included
with the kit must be
with the kit must be
carefully followed.
carefully followed.
Pipe Installation
Inlet Pipe and Outlet Pipe Installation
Use pressure resistant pipe to connect the inlet and outlet
water pipes of the water heater and the local water pipe
(Make sure to place the rubber ring). Before connecting the
inlet water pipe, flush the inside of the pipe.
PLEASE NOTE: SH22 IS FOR OUTDOOR PERMANENT INSTALLATIONS ONLY AND SH22I IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL
AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
Support: Support.Eccotemp.com
Support: Support.Eccotemp.com
Insulation blankets, available to the
general public, for external use on
gas water heaters are not
necessary. The purpose of an
insulation blanket is to reduce the
standby heat loss encountered with
storage tank heaters. This water
heater does not store water making
an insulation blanket unnecessary.
The manufacturer's warranty does
not cover any damage or defect
caused by installation, attachment
or use of any type of energy saving
Shop Online: www.Eccotemp.com
Shop Online: www.Eccotemp.com
or other unapproved devices
(other than those authorized by
the manufacturer) into, onto or in
conjunction with the water heater.
The use of unauthorized energy
saving devices may shorten the
life of the water heater and may
endanger life and property.
The manufacturer disclaims any
responsibility for such loss or injury
resulting from the use of such
unauthorized devices.
Hot and Cold Pipe
Insulation Installation
For increased energy efficiency,
use pipe insulation. Please install
the insulation, according to the
illustrations above, making sure to
insulate all the way to the top. Do not
cover any drain or pressure valve(s).
Gas
Inlet
Hot Water
Cold Water
NOTICE: The hot and cold pipes
NOTICE: The hot and cold pipes
should be insulated as shown help to
should be insulated as shown help to
provide additional freeze protection
provide additional freeze protection
Phone: 866-356-1992
Store Locator: Eccotemp.com/locator
Check
Valve
Inlet
Pipe
35
Designed in
Summerville, SC

Publicité

loading

Ce manuel est également adapté pour:

Sh22i