Télécharger Imprimer la page

Eccotemp SH22 Manuel page 31

Masquer les pouces Voir aussi pour SH22:

Publicité

Les langues disponibles

Les langues disponibles

F =
Clearance to outside
Clearance to outside
corner
corner
G =
Clearance to inside
Clearance to inside
corner
corner
H =
Clearance to each side
Clearance to each side
of center line extended
of center line extended
above meter /regulator
above meter /regulator
assembly
assembly
I =
Clearance to service
Clearance to service
regulator vent outlet
regulator vent outlet
J =
Clearance to
Clearance to
nonmechanical
nonmechanical
air supply
air supply
inlet to building or the
inlet to building or the
combustion air inlet to
combustion air inlet to
any other appliance
any other appliance
K =
Clearance to a
Clearance to a
mechanical air
mechanical air
supply inlet
supply inlet
L =
Clearance above paved
Clearance above paved
sidewalk or paved
sidewalk or paved
driveway located on
driveway located on
public property
public property
M = Clearance under veranda,
Clearance under veranda,
porch, deck or balcony
porch, deck or balcony
* For clearances not specified in ANSI Z223.1 / NFPA 54 or CSA-B149.1, one of the following shall be indicated:
A) A minimum clearance value determined by testing in accordance with Clause 5.20, or;
B) A reference to the following footnote:
"Clearance in accordance with local installation codes and the requirements of the gas supplier. "
• A vent shall not terminate directly above a sidewalk or paved driveway that is located between two
single family dwellings and serves both dwellings.
• Permitted only if veranda, porch, deck, or balcony is fully open on a minimum of two sides beneath
the floor.
Notes:
1) In accordance with the current CSA B149.1 Natural Gas and Propane Installation Code
1) In accordance with the current CSA B149.1 Natural Gas and Propane Installation Code
2) In accordance with the current ANSI Z223.1 / NFPA 54 National Fuel Gas Code
2) In accordance with the current ANSI Z223.1 / NFPA 54 National Fuel Gas Code
PLEASE NOTE: SH22 IS FOR OUTDOOR PERMANENT INSTALLATIONS ONLY AND SH22I IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL
AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
Support: Support.Eccotemp.com
Support: Support.Eccotemp.com
*
*
*
*
4 ft (1.2 m) below or to
4 ft (1.2 m) below or to
side of opening; 1 ft (300
side of opening; 1 ft (300
mm) above opening
mm) above opening
3 ft (91 cm) above
3 ft (91 cm) above
if within 10 ft (3 m)
if within 10 ft (3 m)
horizontally
horizontally
*
*
Shop Online: www.Eccotemp.com
Shop Online: www.Eccotemp.com
3 ft (91 cm) within
3 ft (91 cm) within
a height 15 ft above
a height 15 ft above
the meter/regulator
the meter/regulator
assembly
assembly
3 ft (91 cm)
3 ft (91 cm)
6 in (15 cm) for
6 in (15 cm) for
appliances ≤ 10,000 BTUH
appliances ≤ 10,000 BTUH
(3 kW), 12 in (30 cm) for
(3 kW), 12 in (30 cm) for
appliances > 10,000 BTUH
appliances > 10,000 BTUH
(3kW) and ≤ 100,000
(3kW) and ≤ 100,000
BTUH (30 kW), 36 in (91
BTUH (30 kW), 36 in (91
cm) for appliances >
cm) for appliances >
100,000 BTUH (30 kW)
100,000 BTUH (30 kW)
6 feet (1.83 m)
6 feet (1.83 m)
7 ft (2.13 m)
7 ft (2.13 m)
12 in (30)
12 in (30)
Phone: 866-356-1992
Store Locator: Eccotemp.com/locator
31
Designed in
Summerville, SC

Publicité

loading

Ce manuel est également adapté pour:

Sh22i