Send To; Operator Parameter - Minox DTC 1000 Mode D'emploi

Please make sure to enter the password using the
upper and lower case letters (MinoX-DTC).
Note 2: If you use a different email address, it
cannot be encrypted with an SSL or TSL security
protocol. These email servers do not allow the
sending of photos sent via your DTC 1000. For more
information, please contact your email provider.

Send To

Here you can define whether the DTC 1000 should
send your photos to a telephone number, an email
address or to both.
If you have chosen "Phone", your DTC 1000 will send
the images to a maximum of 4 telephone numbers.
If you have chosen "Email", your DTC 1000 will send
the images to a maximum of 4 email addresses. If
you have chosen "Both", your DTC 1000 will send the
images to a maximum of 4 telephone numbers and
up to 4 email addresses simultaneously.
Note: If you choose the GPRS option, you can
send images only to email addresses and not to
telephone numbers – the options "Phone" and
"Both" are not possible.

Operator Parameter

Your DTC 1000 has been pre-configured to selected
mobile phone providers around the world. You can
select the pre-configured settings for your country
[Fig. 7] or manually configure your camera if your
provider is not listed.
First select your country and then your provider in the
drop-down lists. If your provider is not listed, select
"Other" in both the "Country" and "Operator" drop-
down lists [Fig. 8]. Next, click on "Custom" to open
the "Operator Param" window [Fig. 9].
7
8
65