Software Update; Camera Information; Connecting The Camera To A Computer - Minox DTC 450 SLIM Mode D'emploi

1. In the main menu, select the menu option "Language"
using the up/down arrow keys (11).
2. Confirm with OK (11).
3. Using the up/down arrow keys (11), select the desired
language (highlighted).
4. Press the OK button (11).
5. The camera has now saved the language you have se-
lected and you are returned to the "Main menu".
Note: By pressing the menu button (13) you will be
returned to the main menu without having to make a
selection. The camera will retain the current language.

Software update

If a software update is available for your DTC 450, please
proceed as follows:
Make sure your DTC 450 is switched off ("OFF" function:
main switch (12), in centre position). Copy all the files
needed for updating to your PC into the root list of a for-
matted SD card. Insert the SD card into your DTC 450 as de-
scribed in the section "Inserting the memory card". Switch
your camera to "Setup mode" (SETUP = setup mode, main
switch (12) in top position). In the main menu, select the
menu option "SD Card Update". Press the OK button (11)
to access the submenu. Using the up/down arrow keys
(11), you can now select "Yes" or "No" and confirm with
OK (11). Select "No" to retain the existing software version
and the camera will return to the submenu. If you select
"Yes" and confirm with OK (11), your DTC 450 will begin
installing the update.
48
The update installation is completed once your camera dis-
plays the MINOX start screen and enters the main menu.
Note: Please note that the process described above
must be followed precisely. Any deviation or infringe-
ment may cause the update configuration to fail. You
may not be able to use the camera. In that case, all
warranty claims will be void.

Camera information

In the main menu, select the menu option "Camera in-
formation" and press the OK button (11). The following
information items are displayed:
1. Number of photos
2. Number of videos
3. Free memory space
4. Battery level
Press the menu button (13) to access the main menu again.

Connecting the camera to a computer

There are two ways of transferring the data to your com-
puter: either you can take out the SD card and read it on
the computer or you can connect the DTC 450 to your
computer using the supplied USB cable.
Connecting using the USB cable
Always ensure that the camera is switched off (main
switch (12) in centre position ("OFF")) before you connect
49