Maintenance; Specifications - Sharp SD-CX1H Mode D'emploi

Maintenance

Cleaning the CD pickup lens


Do not touch the CD pickup lens. If fingerprints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.

Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
ENGLISH
E-57

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.

General
Pickup (Lens)

Amplifier

CD player
Power source AC 230 V, 50 Hz
Power consumption Power on: 42 W
Power stand-by: 0.6 W (*)
Dimensions Width: 330 mm (13")
Height: 208 mm (8-3/16")
Depth: 190 mm (7-1/2")
Weight 5.0 kg (11 lbs.)
( * ) This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Refer to page 11 to cancel the demonstration
mode.
Amplification system 64fs 1-bit switching
(Remarks: fs = 44.1 kHz)
Rated output power RMS: 40 W (20 W + 20 W) (DIN 45 324)
A/D noise shaping 7th-order
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals Auxiliary: 500 mV/47 kohms
Type 1-disc vertical compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 1-bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
(delta - sigma) modulation