Sharp SD-CX1H Mode D'emploi page 170

Timer and Sleep Operation (continued)
5
Press the REC LEVEL/CURSOR
PLAY" or "TIMER REC" mode.
For timer playback:
6
Press the ENTER button.
7
Press the REC LEVEL/CURSOR
to start, and press the ENTER button.
8
Press the REC LEVEL/CURSOR
utes, and press the ENTER button.


Unless the timer setting is changed, the ending time will automatically be set for
one hour after the starting time.
9
Press the REC LEVEL/CURSOR
to stop, and press the ENTER button.
ENGLISH
E-47
or button to select "TIMER
For timer recording:
or button to specify the hour
or button to specify the min-
or button to specify the hour
10
Press the REC LEVEL/CURSOR
utes, and press the ENTER button.
11
Press the REC LEVEL/CURSOR or button to select the desired
function.
To select the timer playback source: CD, MD, TUNER or AUX.
To select the timer recording source: TUNER or AUX.
12
Press the ENTER button.
13
Press the REC LEVEL/CURSOR or button to adjust the volume.


Be careful not to turn the volume up too high.
14
Press the ENTER button.
Timer playback Timer recording


The timer setting is displayed in order.


The unit will enter the stand-by mode and
then the playback or recording stand-by
mode automatically.
When the preset time is reached, playback or recording will start.


In timer playback, the volume will increase gradually. In timer recording, it will
start with the volume you set.
When the timer end time is reached, the system will enter the power stand-by
mode automatically.
or button to specify the min-
TIMER