Timer And Sleep Operation - Sharp SD-CX1H Mode D'emploi

Timer and Sleep Operation

Timer playback:
The unit turns on and plays the desired source (CD, MD, TUNER, AUX) at the preset
time. At the end time, the unit enters the power stand-by mode automatically.
Timer recording:
The unit turns on and starts recording from the desired source (TUNER, AUX) at the
preset time. At the end time, the unit enters the power stand-by mode automatically.

Timer playback/Timer recording
Before setting timer:
Whilst the power is in the stand-by mode, press the DISPLAY button on the re-
mote control to check that the clock is on time.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR
to select "TIMER SET".
4
Within 10 seconds, press the ENTER button.
or button
Continued to the next page
ENGLISH
E-46