Error Messages - Sharp SD-CX1H Mode D'emploi

Error Messages

When an error message is displayed, proceed as follows:
Error messages Meaning


BLANK MD Nothing is recorded. (Neither
music nor disc name is re-
corded.)


Can't COPY You tried to record from a
copy prohibited CD.


Can't EDIT A track cannot be edited.


Can't READ* The disc is damaged.


(*: Number or TOC information cannot be
symbol) read.


MiniDisc not specified.


Can't REC Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.


Can't T REC Timer recording is impossible
or there is no available space
on the MD.


The disc is out of recording
space.


Can't WRITE The TOC information could
not be created properly due to
a mechanical shock or to
scratches on the disc.


CD NO DISC A CD has not been loaded.


The CD data cannot be read.


DISC FULL The disc is out of recording
space.


EDIT OVER You chose 21 or more tracks
for track editing.


Er - MD ** A MiniDisc is not working
properly.
(**: Number or
symbol)
Remedy


Replace it with another disc.


Replace the CD.


Change the stop position of the
track and then try editing it.


Replace it with another disc.


Erase the disc and try recording
again.


Re-record or replace the Mini-
Disc.


Replace it with another record-
able disc.


Set this unit to the stand-by
mode and try to write the TOC
again. (Remove any source of
shock or vibration whilst writing.)


Load a CD.


Reload the CD.


Replace the disc with another
recordable disc.


Decrease the number of tracks.


Press the MD button.


Set this unit to the stand-by
mode and turn the power on
again.
Error messages Meaning


MD NO DISC A MiniDisc has not been load-
ed.


The MiniDisc data cannot be
read.


NAME FULL The number of characters for
the disc name or track name
exceeds 40.


NOT AUDIO The data recorded on this disc
is not audio data.


PLAYBACK MD You tried to record on a play-
back-only disc.


POWER ? A MiniDisc is not working
properly.


PROTECTED The disc is write protected.


TEMP OVER The temperature is too high.


TOC FORM ** TOC information recorded on
the MD does not match the
(**: Number or
MiniDisc specifications or it
symbol)
cannot be read.


TOC FULL There is no space left for re-
cording track numbers.


TOC FULL 1 There is no space left for re-
cording character information.


? MD DISC The data contains an error.


MiniDisc not specified.
Remedy


Load a MiniDisc.


Reload the MiniDisc.


Shorten the disc or track name.


Replace the disc.


Replace it with another record-
able disc.


Set this unit to the stand-by
mode and turn the power on
again.


Move the write protection tab
back to its original position.


Set this unit to the stand-by
mode and wait for a whilst.


Replace it with another disc.


Erase the disc and try recording
again.


Replace it with another record-
able disc.


Replace it with another record-
able disc.


Erase the needless characters.


Press the MD button.


Replace it with another disc.
ENGLISH
E-54