Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
TAPE 1
TAPE 2
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
General
Power source:
AC 110-127 V/220-240 V, 50/60 Hz
DC 15 V ["D" size (UM/SUM-1, R20
or HP-2) battery x 10]
Power consumption:
31 W
Output power:
PMPO; 200 W (Total)
(AC operation)
MPO; 50 W (25 W + 25 W)
(AC operation)
RMS; 25 W (12.5 W + 12.5 W)
(DC operation, 10 % T.H.D.)
Input terminal:
Mixing microphone; 600 ohms
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
Dimensions:
Width; 300 mm (11-13/16")
Height; 262 mm (9-1/2")
Depth; 220 mm (8-11/16")
Weight:
4.1 kg (9.1 lbs.) without batteries
Compact disc player
Type:
Compact disc
Signal readout:
Non-contact, 3-beam semi-conduc-
tor laser pickup
Audio channels:
2
Filter:
8-times oversampling digital filter
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001 % W. peak)
Internal care
Dirty heads, capstans or pinch rollers can cause poor sound
and tape jams. Clean these parts with a cotton swab moist-
ened with commercial head/pinch roller cleaner or isopro-
pyl alcohol.
After long use, the deck's heads and capstans may be-
come magnetised, causing poor sound. Demagnetise these
parts once every 30 hours of playing/recording time by us-
ing a commercial tape head demagnetiser. Read the
demagnetiser's instructions carefully before use.
Do not touch the laser pickup lens. If fingerprints or dust
accumulate on the pickup, clean it gently with a dry cotton
swab.
External care
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or other
chemicals.
Radio section
Frequency range:
FM; 88 - 108 MHz
SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW; 526.5 - 1,606.5 kHz
Tape recorder section
Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB (TAPE 1, recording/playback)
55 dB (TAPE 2, playback)
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 9 V electric governor
Bias system:
AC bias
Erase system:
Magnet erase
Speaker section
Type:
2-way type
Speakers:
12 cm (4-3/4") free-edge speaker x
2
Tweeter x 2
Maximum input power: 25 W
Rated input power:
12.5 W
Impedance:
8 ohms
Dimensions:
Width; 235 mm (9-1/4")
Height; 262 mm (10-5/16")
Depth; 220 mm (8-11/16")
Weight:
1.8 kg (4.0 lbs.)/each
E-12
Publicité
Chapitres
Table des Matières
