Timer And Sleep Operation - Sharp CD-BA3100 Mode D'emploi

Timer and Sleep Operation

Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
Sleep operation:
The radio, compact disc and cassette tape can all be turned off automatically.
E-23 ENGLISH
■ Setting the Clock (See page 12.)
■
Timer playback or Timer recording
Before setting timer:
1. Press the CLOCK button to check that the clock is on time.
2. For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE 2 cassette
compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE (1 V 2) button to select the
desired function.
To select the timer playback source: CD, TUNER (BAND) or TAPE (1 V 2).
To select the timer recording source: TUNER (BAND).
When you selected the TUNER (BAND), tune in to the desired
station.
3
Adjust the volume using the VOLUME control.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly until " f PLAY" or
" f f REC" is displayed.
For timer playback
5
Press the TUNING/TIME ( X or W W ) button to specify the hour to
start, then press the MEMORY/SET button.
The illustrations show the timer playback setting.
For timer recording