Grizzly ARM 4041 Lion Set Traduction De La Notice D'utilisation Originale page 39

All manuals and user guides at all-guides.com
1. To mount the grass catch box
E
(14) lift the impact protection (15)
and mount the grass catcher box
(14).
2. Lower the collision guard (15)
onto the grass box (14) - it will
keep it in place.
3. To remove the grass box (14),
lift the collision guard (15) and
unhook the grass box from
the mounting bracket. Flap
down the collision guard to the
housing.
A level indicator is fitted on the
side of the grass bag.
Flap open: grass catcher empty
Flap closed: grass catcher full
Mulching
As an alternative to the grass collection
basket, you can use the lawnmower with
the mulch kit installed.
Inserting the mulch kit
J
1. Lift the rear bumper (15) and
remove the collection bag (14),
if installed.
2. Insert the mulching kit (20) into
the opening as illustrated.
3. Lower the rear bumper (15)
again. It will keep the mulch kit
(20) in place.
Adjusting the Cut Height
There are 7 different cutting heights:
60-75 mm - large cutting height
40-60 mm - medium cutting height
25-40 mm - low cutting height
I
1. Hold the cutting height adjuster
(13) and move it to the correct
cutting height, as appropriate.
The correct height is around 25 – 45 mm
for a decorative lawn and around
45 –65 mm for a used lawn.
A higher cut height should be selec-
ted for the first cut of the season.
Observe noise control and local
regulations.
Switching On and Off
F
1. Place the mower on a level sur-
face.
2. Toggle the lock switch (6), lift the
transparent cover of the device
housing, and insert the charged
battery (7) into the device along
the guide rail. You should be
able to hear the rechargeable
battery lock into place.
3. Insert the ignition key (21) in the
corresponding opening next to
the battery (7).
4. Before switching on, ensure that
the equipment is not in contact
with any objects.
5. To switch the lawnmower on,
press the power switch (17) and
hold it down while pressing one or
more of the safety switches (18)
against the bow-type handle (1).
Release the power switch (17).
6. To switch the apparatus off, let
go of the security switch (18).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.
GB
39