Grizzly ARM 4041 Lion Set Traduction De La Notice D'utilisation Originale page 38

GB
2. Attach the screws with washers
to the desired slot in the
housing (11). You can select
from 3 different height levels.
Release the lower wing nuts (5)
and attach the lower bar to the
device.
Install curved handle
1. Fasten the bow-type handle (1)
C
with the enclosed screws, the
washers and the upper wing
nuts (2) to the right and left of
the lower bar (4).
2. Clipping in the cable holders:
Clip the cable holders (3) onto
the lower bar to fixate the ma-
chine cable (16)
Upon releasing the wing nuts,
you can fold the bow-type
handle downwards to store the
device.
Installing the grass box
Now just stretch the rubber lips
D
of the collection net over the
bars of the grass collection bas-
ket (14)
Attention: Do not operate the ap-
pliance until the collision guard
and grass box are fully installed.
Risk of injury!
Initial Operation
Before operating the machine,
you must
- install the upper and lower upper handles:
- install the collection bag
38
All manuals and user guides at all-guides.com
Caution! Risk of injury! During
the assembly or disassembly of
the collection bag, the engine
must be turned off and all mo-
ving parts must have come to a
standstill. Remove the battery
from the device before carrying
out any work.
Operation
Caution! Risk of injury! Always
wear appropriate protective
equipment and work gloves
while working with the appli-
ance. Prior to each use, ensure
that the appliance is working
correctly. Ensure that the coll-
ection bag is installed correctly
and the device has been moun-
ted properly. Do not use the
device if a switch is damaged.
Personal protective equipment
and a fully functional appliance
reduce the risk of injuries and
accidents.
The mower must only be set
when the motor is switched off
and the blades are shut-down.
Switch of the device, pull the igniti-
on key (11) and wait for the blades
to come to a stop. There is a risk of
personal injury.
Mounting/removing the grass
box
Prior to using the collection box,
the mulch kit (20) must be remo-
ved.