Gima MONITEUR SPOT-CHECK PC-300 Manuel De L'utilisateur page 65

65
ENGLISH
Description:
1. : External DC power input socket.
2. : Power switch: long time press it to turn on/off the monitor.
3/4. Port 1/Port 2: Connector to link with temperature probe, smart SpO
probe or blood
2
glucose meter.
5. NIBP: Cuff connector.
6. : Charge / USB data interface.
7.
: Connector to link with other devices (reserved).
8. Battery cover.
NOTE: Figure 2.3A is the upper-side-view for the previous version device, and Figure 2.3B
is the upper-side-view for the current version device. The difference between the two versions
is seen on the upper-side panel. The previous version device has only 2 " " ports, marked
"PORT1" and "PORT2", which are the generic connectors capable of connecting any
combination of temperature probe, smart SpO probe or ECG accessory (for example Easy
2
ECG Monitor). However, the current version device has 3 " " ports, marked "SpO ", "TEMP"
2