Cleaning And Disinfection Of Accessories - Gima MONITEUR SPOT-CHECK PC-300 Manuel De L'utilisateur

 Wipe the surface of the monitor and transducers with an alcohol impregnated wipe,
and dry it with clean cloth or just air-dry.
 Dilute the cleaner.
 Do NOT use the scrub materials.
 The monitor can be disinfected. Please clear the monitor first.
 Do not let the liquid cleaner flow into the connector jack of the monitor to avoid damage.
 Clean the exterior of the connector only.
 Do NOT let any liquid flow into the shell or any parts of the monitor.
 Do NOT let the cleaner and disinfectant stay on its surface.
 Do NOT perform high pressure sterilization to the monitor.
 Do NOT put any parts of the monitor or its accessories in the liquid.
 If the monitor is accidentally wetted, it should be thoroughly dried before use. The rear
cover can be removed by qualified service technician to verify absence of water.
 Do NOT pour the disinfectant on its surface while disinfecting.

7.3 Cleaning and Disinfection of Accessories

It is recommended to clean and disinfect the accessories (excluding SpO
of gauze which has been soaked in 75% Alcohol or 70% Isopropanol before using.
 Do not use damaged accessories.
 Accessories can not be entirely immerged into water, liquor or cleanser.
 Do NOT use radiation, steam or epoxyethane to disinfect accessories.
 Wipe off the remained alcohol or isopropanol on the accessories after disinfection, for good
maintenance can extend life of accessories.
ENGLISH
probe) with a piece
2
104