Alarm Buffer - Abus TVIP71500 Manuel Utilisateur

The switching modes of the digital input can be found in section 4.3 "Alarm input
and output".
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".

6.13 Alarm buffer

This function can be used in connection with various functions (e.g. FTP, SMTP, alarm output or saving data
on a network drive). When activated, the video data is pre-recorded and post-recorded in the internal memory.
Alarm buffer:
Recording capacity:
Pre-alarm period:
Post-alarm period:
Recording time:
Pre-alarm period:
Post-alarm period:
This function can be used to transfer image data in the event of a network failure
(e.g. to an FTP server). The data is stored in the alarm buffer according to the
settings and transmitted as soon as the network becomes available again.
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Activates or deactivates the alarm buffer.
Displays the maximum available capacities for pre-recording and post-
recording.
Pre-recording time (in seconds).
Post-recording time (in seconds).
Settings for the maximum pre-recording and post-recording time.
Setting of the pre-recording time (in seconds). This value cannot exceed the
available pre-recording capacity.
Setting of the post-recording time (in seconds). This value cannot exceed the
available post-recording capacity.
145